Skip to content

Glossary

The documentation uses these words the same way on every page. Where a word is a label on screen, it is written as the screen writes it.

Term Meaning
Account menu The menu behind your name at the top of the Fabricator panel: Edit name…, your account’s pages on the website, Report a problem…, Close panel and Log out (Log in when you are logged out).
Atlas The window where the panels lie flat, and where you set seams, materials and details and make the output. It opens from the FAB2D chip or the map button in the Fabricator panel.
Break dot In the Window tool, a dot where a window’s outline turns from one side to the next. Click it to switch that break on or off.
Business details The name, address and tax number on the website’s Billing page that invoices are made out to. They decide the VAT.
Card The panels of one wireframe, kept together in the Atlas, with a label at its lower right.
Chart A group of panels the Atlas lays out joined at their shared edges, as one island. The Atlas’s header counts them: “6 panels · 2 charts”.
Constructor Fabricator’s 3D editor in the browser, at app.fabricator.hr, for tracing a wireframe over a scan. See From a scan.
Copy A second cutting of a panel, a reinforcement or a window glass, made with Alt+drag. A panel’s copy is named after the original with a letter, such as 3-2-B.
Corner ending How two seam allowances meet at a corner: Miter, Square or Fold. Set with the Corners tool.
Cut line The outline the material is cut along: the drawn line plus the seam allowance. A free account’s preview leaves it out.
Cut offset How far beyond the drawn line the material is cut: the seam allowance. One of the values of a seam type.
Day Pass A plan that gives full solves, 2D patterns and nesting for 24 hours, paid once. It does not renew.
Detail library Your reusable details (a vent, a strap patch), each drawn once and placed on panels. It is kept on your computer.
Drawn card A card made from flat outlines with Import Drawn Panels. Its connections are set in Map Drawn Panels.
Drawn line The edge of the wireframe as you drew or measured it. A seam type’s values are measured from it.
Edge type The role of a wireframe curve, given by its layer: Fixed edge, Cable, Seam, Join, Anchor, Assist, Excluded or Leaf. See Edge types.
Estimate The net area of a card’s panels and roughly the length of material they take, written above the card. The length assumes 70% of the material is used.
Extrude A Shift+drag of wireframe curves: a copy is made and side edges are drawn between the two.
FAB2D, FAB3D The small chips that bring back the Atlas and the Fabricator panel when they are parked.
Fabricator panel The panel beside Rhino’s viewport, opened with the Fabricator command, with the edge types, the frame tools and the solver.
Fabricator toolbar Rhino’s small toolbar with three buttons: one brings the Fabricator panel back, one the Atlas, and one checks for updates.
Face up, face down Which side of the material is toward you in the Atlas: the outer side (the face), or the inner side.
FrameConnect The panel’s switch for wireframe connectivity.
Free account An account with no plan. Every drawing and editing tool and the preview work; full solves, 2D patterns and nesting do not.
Glass The clear piece of a window, cut as its own piece in the window’s material.
Insertion point The point a detail from the Detail library is placed by.
Main material The material every panel uses unless a panel or a piece is given another.
Material direction How a panel lies on the roll. The Atlas also calls it grain.
Member A person on someone else’s team, who works on that team’s plan.
Near miss A curve end that stops close to another curve or a corner without touching it. Check marks them.
Nest The layout of the pieces on the material for cutting, and the Atlas’s tool that makes it.
Notch A small alignment mark on an edge, matched on the neighbouring panel.
Owner The person who manages a team and pays for its plan.
Panel One piece of fabric: a closed loop of edges in the wireframe.
Pen line A line drawn on a piece for the sewer, set by Pen 1 offset and Pen 2 offset.
Piece Anything cut separately: a panel, a reinforcement, a pocket, a window glass.
Pin, join (drawn panels) In Map Drawn Panels: a join says two edges are sewn together; its ends are pins.
Plan Pro or a Day Pass: what full solves, 2D patterns and nesting need. See Plans.
Plugin connection A computer on which the Rhino plugin is logged in to your account, listed on the website’s Settings page.
Preview The panels flattened straight from the wireframe, before a solve. Free on every account.
Pro The monthly plan, with a 14-day free trial.
Reinforcement An extra layer along an edge or as a patch, cut as its own piece.
Seam legend The list of the seam types a pattern uses, with your names and descriptions, drawn with the 2D output.
Seam profile A set of seam types: your shop’s standard. It is a file on your computer.
Seam type How one side of an edge is cut, marked and reinforced. See the Seam profile guide.
Seat Where a team’s plan counts seats, the right of one person to full solves, 2D patterns and nesting on it. The owner holds the first.
Selection estimate The estimate for only the selected panels, shown at the top left of the Atlas.
Solve The 3D calculation that shapes the fabric and makes the panels exact. Needs a plan.
Status bar The line at the foot of the Fabricator panel that reports the last action.
Status line The line under your name in the Fabricator panel. It appears only when there is something to say: a log-in in progress, an update.
Stock lengths The lengths of material you have. With Available stock chosen, the nest fills them before it uses the roll.
Suggested cut A light-blue dotted line on a panel that is wider than the material’s usable width: where the Atlas proposes to cut it.
Team The owner and the members who share one plan. See Work as a team.
Window A clear opening in a panel. Its glass is cut as its own piece.
Window type How a window is made: the glass allowance, the offsets, pen or cut, the notches. Window types are kept on your computer.
Wireframe The curves you draw in Rhino that mark every edge of the fabric.
Wireframe connectivity Curves snapped onto each other stay connected while you move and edit them.