What Fabricator does
Fabricator turns a 3D wireframe of a cover, a cushion, an enclosure or a bimini into flat patterns you can cut. You draw the edges of the fabric in Rhino. Fabricator finds the panels between them, shapes the fabric in 3D, lays every panel flat, adds seam allowances, reinforcements, notches and marks, and nests the pieces on your material.
Where you work
Section titled “Where you work”| Place | What you do there |
|---|---|
| The Rhino viewport | Draw and edit the wireframe, and see the solved fabric in 3D. |
| The Fabricator panel | Beside the viewport: edge types, frame tools and the 3D solver settings. |
| The Atlas | The 2D window: every panel laid flat. Materials, seams, details, nesting and the 2D output are all here. You spend most of a project in it. |
A tour of the screen shows each of them.
A project from start to finish
Section titled “A project from start to finish”- Draw the wireframe in Rhino.
- Open the Atlas: the panels appear flat.
- Set the material: the Main material and its direction.
- Assign seams: give each edge its seam type.
- Solve in 3D, when the shape needs it.
- Add details: cutouts, windows, reinforcements, marks.
- Output the 2D patterns and the nest.
Seams and the 3D solve can be done in either order.
Five ideas to hold on to
Section titled “Five ideas to hold on to”- The wireframe is the master. The Atlas mirrors it. A cut or a join you make in 2D changes the 3D curves too.
- Every edge has a role. The layer a curve is on (Seam, Cable, Fixed edge and so on) tells Fabricator how that edge behaves. See Edge types.
- A closed loop of edges is a panel. Curve ends must meet exactly. Snap curves onto each other and Fabricator keeps them connected from then on, whatever you move.
- Each wireframe is a card. In the Atlas, the panels of one wireframe sit together on a card.
- A panel is a preview until it is solved. Simple shapes are already right as a preview. Shapes that stretch and curve need the 3D solver before you cut them.
What this manual assumes
Section titled “What this manual assumes”You can draw curves in Rhino, use layers, and snap to points and curves. Everything else is explained as it comes up.