The letter keys work while the Atlas has the keyboard and you are not typing
in a field. They do nothing with Ctrl or Alt held.
| Key |
What it does |
| S |
Split tool, on or off |
| J |
Join tool, on or off |
| N |
Notch tool, on or off |
| R |
Reinf tool, on or off |
| C |
Cutout tool, on or off |
| D |
Detail tool, on or off |
| Ctrl+Z |
Undo |
| Ctrl+Y or Ctrl+Shift+Z |
Redo |
| Esc |
Cancels what is half done: a drawing, a drag, a turn, a placement from the Detail library. With nothing half done, puts the tool down and clears the selection. |
| Enter |
Finishes a Reinf, Cutout, Detail or Window drawing |
| Delete or Backspace |
Removes the selected reinforcement, cutout, detail, glass or copy |
| Space, held |
Drag with the left button to pan |
| Ctrl, held |
With Reinf, Cutout, Detail or Window on: the shape menu, Draw or Circle |
| Digits |
After placing a circle’s centre: type its radius. Enter confirms. |
While the Detail editor or the Window tool is open, Undo and Redo act on that
editor’s own steps.
| Action |
What it does |
| Mouse wheel |
Zooms around the pointer |
| Right or middle drag |
Pans |
| Click a panel |
Selects it |
| Left drag on empty map |
Selects the panels in the box |
| Drag a panel |
Moves it |
| Drag the round handle |
Turns the selection; hold Shift to snap to 15° |
| Alt+drag a panel, a strip or a glass |
Makes a copy of it |
| Double-click a direction line |
Turns that panel’s material direction 90°. Lock direction must be unticked. |
| Double-click a card’s label |
Renames the card |
| Shift+click or Ctrl+click a card’s label |
Selects that card |
| Right-click a panel |
The panel menu: copy, window, face, colour and material |
| Right-click, nothing under the pointer and nothing selected |
Picks the last tool up again |
| Tool |
Action |
What it does |
| Seams |
Click / Shift+click / Ctrl+click |
Picks an edge / adds one / takes one away |
| Seams |
Right-click |
Opens the seam types for the picked edges |
| Seams, Pocket |
Alt+click |
Picks only the run you clicked, not the whole seam |
| Seed |
Alt+click |
Lays the whole map out from that panel |
| Pocket |
Right-click |
Opens the pocket types |
| Reinf, Cutout, Detail |
Click; hold Shift |
Adds a point; draws a curved stretch |
| Reinf, Cutout, Detail |
Click near the start |
Closes the shape |
| Reinf, Cutout, Detail |
Right-click |
Confirms and puts the tool down |
| Split |
Hold Shift |
Draws the split as a curve |
| Action |
What it does |
| Shift+drag wireframe curves |
Extrudes them: the curves move, a copy stays where they were, and side edges join the two. See Draw the wireframe. |
| Shift+drag a gumball arrow, or type a distance |
The same extrude, by the gumball or by an exact distance |
| Double-click a wireframe curve |
Selects its whole connected wireframe |
| Shift+double-click |
Adds that wireframe to the selection |
| Ctrl+double-click |
Takes that wireframe out of the selection |
The side edges of an extrude go on the current layer when it is an edge type
layer; otherwise they take the layer of the curve you moved. Clicking an edge
type in the Fabricator panel makes its layer current.